New 140mm wall products in the Pink® Batts® range
If your project is being built using 140mm framing at 400mm centres for a “stronger” structure or the project is located in a “High” or “Very High” wind zone then new “Pink® Batts® Ultra® 140mm Narrow Wall” products (380mm width) is our best product option for maximising the thermal efficiency of the structure while minimising waste during installation.
The extra thickness allowed using 140mm framing allows you to achieve better thermal performance by using the higher R-value insulation available in the 140mm range. R-values in the Pink® Batts® insulation 140mm wall range goes up to R4.0, while R2.8 is the highest R-value achieved when thickness is restricted to Pink® Batts® 90mm wall insulation.
Reduced time and increased efficiency:
When the spacing between studs is 400mm, then the “Narrow Wall” range provides products correctly sized to the framing dimensions and decreases the number of cuts needed on site to install the insulation. This improves the quality of the work and reduces the time taken to get the job completed.
The Narrow Wall range:
The width and the height dimension of the new Pink® Batts® Ultra® 140mm Narrow Wall product range mirrors the rest of the Pink® Batts® Narrow Wall range at 1220mm x 380mm. The Pink® Batts® 90mm Narrow wall range consists of two R-values.
Look out for these new products arriving in your local building merchant and visit pinkbatts.co.nz to download product datasheets and installation instructions.
Was this article helpful? Let us know via: Email | Facebook | Twitter. To receive your FREE monthly copy of FPB Today newsletter, Subscribe here, or follow us on Facebook | Twitter | Pinterest | YouTube | Instagram