CHH Woodproducts - Ecoply Flooring

Ecoply Flooring:

• Supplied as standard with a sanded C grade surface with D grade rear (CD grade)
• A higher appearance BD grade sheet is available in 19 mm thickness for clear finish internal applications (2400 × 1200mm untreated only) - Designers must expect the surface to mark more easily than hardwood systems as Ecoply Flooring is manufactured from relatively soft Radiata Pine
• Supplied in F8 stress grade (F11 available upon request)
• 19 mm thick flooring supplied in Longspan which has a higher stiffness than standard F8 products for increased span capabilities
• Plastic tongue and groove on long edges, no blocking needed under edge joints (unless otherwise specified) saving time and money
• Thicknesses ranging from 15 - 25mm
• Sheet dimensions: 2400 / 2700 × 1200mm
• Available untreated or H3.2 CCA treated for exterior and wet areas (when installed according specifications). H3.1 LOSP treated available upon request
• Recommended as a substrate for flexible membranes in roof and decking applications where the membrane requires a smooth substrate or where the avoidance of visible surface indentations is critical